Exhibition #1 Brisbane Beginnings

All is well in the universe. After a successful debut at the 2017 Brisbane Model Train Show over the weekend of May 6-7, Philden is back home, unpacked, undamaged and once more standing proudly above my desk as I write this. Unbolting a 2.6 metre (or just under 9 foot long) layout, and carrying it down 5 flights of stairs before packing it carefully in the back of our hatchback for the 90 km trip down to Brisbane wasn't as daunting as I'd imagined. Upon arrival, it simply bolted back together without any fuss and ran like clockwork until the final closing announcement was made on Sunday afternoon.

One tight squeeze, and it just fitted. Denise was worried it would look like we'd stolen a hearse!

Although I primarily built Philden as a space-saving measure, I always had one eye on being able to take the finished layout to exhibitions. As such, the layout was designed to fit into the back of our Ford Mondeo hatch. Having measured the space available in the back of our hatchback 2 years ago when I first started construction, we had one moment where Denise and I held our breath as we started loading the car. The back seats don't quite fold-down flat, and the angle that the layout sat in the back of the car required the front seats to be moved forward ever so slightly. Fortunately we didn't have to set off with our knees pressed up against the windscreen! So with Carrie Underwood blaring on the car stereo, we made good time heading down the Bruce Highway against the traffic on a Friday afternoon and arrived at the Brisbane Showgrounds around 4 pm to set-up.

Friday night lights! A quick test after set-up to make sure it all worked.

Donning our flouro-yellow safety vests, Denise and I soon set to work putting my layout together. The floor of Brisbane Showground's Marquee proved impossible to find a patch of level ground. Fortunately the event organizers were better prepared than I was. There were plastic bins full of ply and timber off-cuts at the ready, and a fellow modeler soon appeared with a spirit level in hand. Just over an hour later, the layout was all wired-up and a quick test with one of my locos revealed all was well. So finding ourselves in Brisbane on a Friday night, we headed off to visit our daughter before the drive back to the Sunshine Coast.

Saturday morning before the doors opened. I thought the curtains looked like they needed ironing.

Saturday. Day one of the 40th running of the Brisbane Model Train Show found us waking early for another 90 km drive down to Brisbane. Carrie Underwood sang in the new day on the car stereo once more, and after a couple of hot meat pies and an iced coffee while the crowd steadily built outside, Philden began it's new life on the exhibition circuit.

I had to set up so close to Walker Models' stand because of the slope of the floor.

It didn't take long for the crowd to pour in, and by 10 am our friends Stuart and Mardi next to us at the Walker Models stand were already doing a roaring trade. Stuart and I thought that being side-by-side would enable Mardi and Denise some time to chat throughout the day. It wasn't until around 2.30 pm however that the crowd calmed down enough to say more than hi. James McInerney from Australian Model Railway Magazine stopped by for a chat, and it was nice to finally talk face to face with someone I'd only previously shared comments with over each other's blog.

Clyde-EMD power made a stunning return, only my 421 came back looking even better in the Interail livery.

Without any infra-red, auto-reversing gizmo to automate running trains, it was left to me, or Denise whenever she took over the throttle, to provide a continuous up-and-back parade of trains for the general public. Being a little unsure of what glitches I may have encountered on the layout's first outing, I elected to set the layout up exactly as it stands above my desk at home, with me standing out front to the side of the little staging shelf. Being that little closer to the public gave me a great insight into what caught their attention.

Dimming the lights during the show made for some great night scenes such as this one of the Xplorer at Philden Station.

Over the two days of the show, I could almost sense that moment where the viewing public had seen enough and were about to turn and walk away. So I chose that sense of feeling to dim the lights on the overhead LED strip using my remote control, and listen to them say in return, "Oh, its night time. And LOOK! There's little people waiting inside the station!" I think the waiting room on my railway station became the most photographed part of the layout, and it was a reminder to myself that it is the little animations such as these that captures the general public's attention. I doubt I would have been able to gauge people's reactions as closely had the layout's backdrop been reversed and the layout been displayed from the opposite side with me standing behind it.

Easily the most photographed scene on my layout over the weekend of the 2017 Brisbane Model Train Show.

There were a number of glowing comments I received from people throughout the weekend, such as fellow blogger Craig Mackie saying that the layout looked better in person than on the internet. Being a perfectionist however, there's a number of things that I need to tweak before Philden's next exhibition at the Pine Rivers Model Train Show in August.

Firstly, while focusing so much on decorating the layout's timber work with some authentic NSW railway memorabilia, I'd overlooked the need to include my layout's name anywhere. I lost count of how many people stood in front and read aloud, "All stations to Granville," simply because that's what the signs said. I need to add a name somewhere for people to know that the layout is called Philden, and then I can avoid all the questions such as; "is that a model of the Granville Bridge?"

Secondly, I'd never had the grain of wheat light bulbs run continuously for that long and for two days straight. By Sunday afternoon the light in the station waiting room was just starting to become visible through a crack in the roof. It seems the warmth given off from the grain of wheat light bulbs caused the wood glue in the roof of the model to dry out and shrink by the umpteenth of a millimeter, but enough to let some light through. This week I'm going to take them out and replace them with some softer LED's. Fixing the crack in the roof will be a piece of cake, and then that problem will be solved.

Thirdly, I got to talk to a lot of people. While some recognized me from this blog, most had never heard of it when I asked them. They all then proceeded to ask me for the web address. I didn't even have a pen and paper let alone a business card. So there's something else I'll have to look at.

Overall however, the layout's first exhibition was a success, and I enjoyed having my wife Denise play such a big part of it, from set-up right through to pack-down. Her thoughtfulness even extended to the point of making sure she took my phone, the car keys and my wallet when I arrived on Saturday morning, just so that I could concentrate on running my trains without any phone calls or distractions. When I did get the chance to go for a quick walk through the venue late each afternoon however, I'd invariably find that I didn't have my wallet on me, and there were some nice specials on offer too! Ah Denise, you know me too well.

Almost lost in the crowd on account of being one of the smallest layouts on display.

By the time the last train ran out of Philden Station on Sunday afternoon, there were zero derailments for the weekend and only one close call from a curious young hand who was trying to pick the horn from my Xplorer set that was parked on the staging shelf. Both Xplorer and said child remain unharmed, (just). What the 2017 edition of the Brisbane Model Train Show did provide however, was a set of memories that now stretch back to 1991, when I'd first moved to Queensland and had attended my first model train show only to discover that by comparison my own modelling skills were purely dreadful. By 2002, I returned with an N scale layout that was built atop a 4 door pine cupboard, called the C&NW Overton Subdivision and by comparison was on the better side of okay. I've only missed attending the Brisbane Model Train Show a handful of times since 1991, and Brisbane for me will always signal new beginnings. I moved to Brisbane when I met Denise, both our children were born there and now Philden now becomes my second layout to have debuted in the River City.

So 45 minutes after the show was declared over, Denise and I pulled out of the Brisbane Showgrounds with the layout once more packed safely away in the back of the Mondeo. Carrie Underwood was singing on the 90 km drive back up the Bruce Highway to make it a 540 km round trip weekend of Country, and the memory of this year's Brisbane Show will provide me with plenty of enthusiasm to not just make a few minor tweaks on Philden, but figure a way to make it look even better the next time the layout is exhibited.

Until the next post, take care!

Reaching the 100,000 Milestone!

It looks like this blog will pass the 100,000 visitor mark in the next couple of hours. Given that this is also my 100th post on Philden Model Railway, not only have the two milestones collided, but its fair to say the past two years have flown by so quickly!

When I started this blog with my first post back on the 14th May 2015, it was due to the excitement of having just come back from the 2015 Brisbane Model Train Show here in Queensland, Australia. Having sold off the final remnants of my former N scale collection, I'd wandered the aisles of the exhibition marquee with eyes wide, calculating what I could afford to buy as I prepared to delve into the world of Australian HO scale modeling. It was something I had wanted to do ever since I was a young boy caught up in the excitement of school holiday trips to Sydney by train. Central Station was simply the grandest station that ever did exist, and surely every other railroad company on earth must be trying to emulate what the New South Wales Railways had achieved. It was a blind-sided mix of one-eyed ignorance and bliss all wrapped together in a giant sesame seed bun! And somehow, I thought it would be wise to document it every step of the way.

The completed framework from 2 years ago.

From knocking-up the framework for a small bookshelf layout on my garage floor, to completing the layout in time for this year's 40th edition of the Brisbane Model Train Show, I've made my fair share of mistakes along the way. But like any good modeler, we simply put these discoveries down to trial and error. They are after all, what makes us better model railroaders in the long run. Not having a lot of room to build a HO scale layout in our small ocean view apartment, the 6' foot bookshelf layout with an additional 3' foot of staging became the limit for what I could construct. Try as I may, extending the layout beyond these dimensions just wasn't going to work. Those who have followed my layout's progress will appreciate that as in life, any good result only follows a lot of hard work.

The night time view of my near complete bookshelf layout.

As a writer, projects such as this blog always stretch your imagination as to where you can take it. Over the past two years I've courted numerous ideas that each required a time and money ratio that was simply beyond what I was able to entertain. There's only so many cottage model railway industries that the hobby can sustain, and in the end, each and every idea I came up with was a case of trying to reinvent the wheel. The amount of time and effort I have put into creating this blog however, is something that I shall be forever proud of. I can honestly say that with the amount of time I've spent creating the pages, links and writing these past 100 posts, I could easily have built this layout three times over!

In the end, Philden has been a fun layout to build, and one that I hope will stand above my desk for many years to come as a form of inspiration for my writing. With the final touches to be completed in the coming weeks, I'll be saving any further updates until after the layout makes its' public debut at the 40th Brisbane Model Train Show on May 6-7, 2017. Following the Brisbane Show, I will of course keep readers updated with the final two additions to this layout, those being the Neath Signal Box to be constructed on the concrete slab that presently stands beside the bus set-down area, and the steel receiving shed that will be constructed over the vacant siding opposite the cement plant. Each of these structures will continue to keep Philden looking fresh as I take it on the exhibition circuit over the coming years. And don't forget, this layout was built with reversible backdrops, meaning I can exhibit it from either side for a completely different perspective.

Finally, to all those readers who have bailed me out over these past two years by purchasing the models from me on eBay that I'd inadvertently discovered were either not compatible with the limited space I had to work with, or the era I was trying to place my layout in, I say a big thank you. After announcing that I had scrapped plans to add a second level extension to Philden, I sold almost everything overnight. I hope you were all happy with getting something for a fair price. To me, it is a reminder of how good this hobby has been to me. I always get enjoyment out of it, and it always gives you something back when you are ready to move onto the next project. For me, that is going to be a return to N scale, and I hope to have my next layout well underway by the end of this year.

Could there be a new blog on the way? I'm really not sure. With a new book project slated for me to start on this year, I'm mindful of burning the candle at both ends. I need some relaxation time too. As for a hobby? I couldn't recommend a better hobby than model railways. But don't just take my word for it, click on the construction page and start reading for yourself. There's 100 posts I've left for future readers to discover and be inspired by.

Until May rolls around, take care, and happy modeling!

See also; Celebrating the 50,000 Milestone!

Creating Authentic Station Announcements

I recently downloaded a program from the RailPage chat forum called DVA 5, and started the fun project of creating sound files for the station announcements on Philden. The program was written and copyrighted by Jonathan Boles back in 1999-2000 and I believe it was the same program used by CityRail to collate their station platform announcements across the Sydney network. With the program now obsolete, Jonathan posted the links to download the Javascript program which he updated to version 5.3.4 on 8th January 2017. Not wanting to be one who violates any redistribution laws, I've simply included the link to Jonathan's post on railpage.com.au below, for those who want to download the program for their own personal use.

https://www.railpage.com.au/f-t11377028.htm

The program setup file is 27.1 MB in size, is free to download and is also free of any addware. It was simple enough to install and even placed a groovy little CityRail L7 logo as the icon on my desktop. On the screenshot above, you'll notice that the left hand column shows the different sound file catalogs, including Sydney-Female and Sydney-Male. Sydneysiders will remember that the male voice that made the platform announcements on the CityRail network was that of Grant Goldman, the 2SM breakfast radio guy, Manly Sea Eagles ground announcer and now the voice of Sky Channel. He was of course replaced by the female voice of Taylor Owynns around 2010. Before recording the announcements for what is now known as SydneyTrains, Taylor was already famous for being the voice of Lulu on the popular children's show Bananas In Pyjamas.

Anyway, using Grant's booming male voice to fit the 1995-2005 era that I model, I soon started playing around using the 1,251 pre-recorded sayings that Mr Goldman had recorded during his time, to collaborate my own CountryLink station announcements for Philden's South North West Explorer. As my fictional Explorer train goes everywhere except east, (or it would fall into the ocean off the coastline of Australia), I had a bit of fun recording the following announcements. Simply press the play button on each of the following clips below to hear what I mean.

There's this train that goes anywhere ending in 'O'.



Or this train going everywhere ending in 'I'.



Or perhaps you'd like to ride this train heading everywhere ending in 'E'.



Or perhaps you'd like a ticket to anywhere ending in 'A'.



Each file you create can be exported as an MP3 file into a folder of your choosing. I then uploaded the MP3 files above to a free sound file sharing site called Clyp, which I felt was a safer way of publicly sharing these examples than providing a link to each MP3 file stored on my Google Drive account. I figured those serious enough to want to add these station announcements to their own layouts, would simply have way more fun downloading the program and creating their own announcements.

After the fun of creating some bogus station announcements had passed, I soon took out my 1990's railway timetables and began compiling announcements for the trains listed within them, starting with all the CountryLink Explorer trains that I could simulate passing through Philden. I then moved onto the CityRail services that I'm going to pretend my 2 car Sydney suburban double-decker is substituting for on my upper level.

So far, I've created over 40 MP3 files. Next up, I'm going to load the completed files onto an iPod Mini Shuffle and connect it to a small hidden speaker beneath my layout. I figure that playing a different station announcement each time my same 2 car Explorer set or double-decker electric train comes and goes from my station, will do wonders to help create the illusion that my models actual connect to somewhere beyond the layout. Because having a small layout sometimes calls for a bit of creative thinking outside the box.

Speaking of boxes, another feature of the DVA 5 program is the station indicator boards. Clicking the indicator tab will open the boxes that enable you to call up various services from actual timetables, and alter the arrival times and platform numbers etc., before sitting back and watching the station names scroll up on the screen just as the blue computer screen indicators do at the Sydney stations that are fitted with them. Perhaps after I have the sound files finished and working in time for the Brisbane Model Train Show in May this year, I can then look at building a working replica indicator screen into the upper level expansion on my layout. Or at least I can have the program open and running on the desk in front of my layout when I running my trains.

Finally, in keeping with the light-hearted approach to my modelling, I'll leave you with one final clip in honour of the Cronulla-Sutherland Sharks winning last year's NRL Premiership. The Up, Up Cronulla service.

Next week I'm heading to Sydney for a short break where, apart from some general sightseeing, I'll be scouting a few train stations in the hope of finding some inspiration for the NSW A-8 centre platform station building on my upper level layout extension. But as usual, I'll let that be a story for another day.